Citroen DS4 Forums banner
1 - 5 of 5 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
Hello everyone!
I need the help of friends for a repair on my DS4 2014 1.6 THP.
On a highway and in the rain, without much visibility, I hit a block, used for detours.
It resulted in a damaged wheel, a bumper, mile headlamp, led, but the worst was having
damaged docking of the front sensors.
The problem is that at the moment of making the connection with the new cable of the
sensors, I lost the order of the wires, of the connector of 10 pins.
I would ask friends to advise me on this, if there is any connection scheme or color photos
of the wires, so I can make it work again.
I thank everyone!</pre>
Edited by: betones
 

·
Registered
Joined
·
492 Posts
If you let me know where the 10 pin connector you are trying to rewire is, I'll take a photo of a correct connection and upload it for you.
 

·
Registered
Joined
·
3 Posts
Discussion Starter · #3 ·
Hi Nicdog,
The 10 pin connector are located in the left side, front wheel, near the led, in the bumper.
It is the wires that leave the lighthouse mile, leds and sensors and connect in the main wiring.

Thanks
</pre>
Edited by: betones
 

·
Registered
Joined
·
492 Posts
I hope this helps sort you out and is what you're after.
I removed the Spot/Driving light and snapped this photo.
10 pin connector - all cable colours and locations visible
 
1 - 5 of 5 Posts
Top