DS4OwnersClub.co.uk banner

1 - 15 of 15 Posts

·
Registered
Joined
·
470 Posts
Discussion Starter #3
Is that so complicted? I keep pressing or holding the MEM button while driving at a certain speed but no value gets memorized.
 

·
Registered
Joined
·
203 Posts
I found if u go into settings on the main console, you can programme up to 6 different s speeds, then once programmed you can select them by pressing mem on the steering wheel, it's quite crap and alot of effort, probably not one of the selling points of the car lol
 

·
Registered
Joined
·
33 Posts
Hi
When in Vehicle parameters, set all your speeds into MEM then when driving with Limiter or Cruise Active press and HOLD the - or + on the steering wheel, this will tab up or down to the next Memory value.

If you set speeds of 30, 40, 50 70 and 85 you have them all virtually. Just press and hold and the MEM kicks in.

Bingo, quite straight forward

Thanks
 

·
Registered
Joined
·
472 Posts
I have never bothered, I find I get a couple of mpg on manual rather than oncruise
 

·
Registered
Joined
·
4 Posts
Sorry for butting in; I can do this part but a series of speed settings are already in the boxes; how do you alter these? I've tried all the obvious buttons but no joy. Thanks in advance.


Bill
 

·
Registered
Joined
·
231 Posts
deresim said:
I have never bothered, I find I get a couple of mpg on manual rather than oncruise
same here, I also find I get better mpg when I control the throttle
did on my last car too
 

·
Registered
Joined
·
470 Posts
Discussion Starter #12
Cruise is better for mpg on long distance drives, besides the UK is quite hilly when compared to Poland and cruise control is not efficient on hilly roads.

BTW dug, have you posted some pics with your newly-fitted door strips yet?

Edited by: DShark
 

·
Registered
Joined
·
5 Posts
Hi you may have already sorted this out, but just incase, here goes:1 Go into the menu until you get the boxes up with the preset speeds in.
2 On your steering wheel, right hand bottom wheel turn this to hi-light box with speed in (Dotted border on box)
3 Press wheel (dotted border then changes)
4 Turn wheel up or down to desired speed
5 Press OK (on Dash)
6 Repeat for all other speeds


Hope this helps
 
1 - 15 of 15 Posts
Top